Login for faster access to the best deals. Click here if you don't have an account.

Flexible ureteroscopy update: indications, instrumentation and technical advances Private individual

1 week ago Free Dating West Raleigh   7 views
Location: West Raleigh

Flexible ureteroscopy update: indications, instrumentation and technical advances

Retrograde ureteroscopy has recently gained a broadened indication for use from diagnostic to a variety of complex minimally invasive therapies. This review aims to look at the recent advances in the instrumentation and accessories, the widened indications of its use, surgical techniques and complications. With minimization of ureteroscopic instruments manufacturers are challenged to develop new, smaller and sturdier instruments that all will also survive the rigors of surgical therapy.

 

Ureteroscopy is defined as retrograde instrumentation performed with an endoscope passed through the lower urinary tract directly into the ureter and calyceal system.[1] With the addition of actively deflectable, flexible endoscopes the indications for ureteral access sheath have broadened from diagnostic to a variety of complex minimally invasive therapies. Current ureteroscopic treatments include intracorporeal lithotripsy (by far the most common), treatment of upper urinary tract urothelial malignancies, incising strictures, evaluation of ureteral trauma, and repairing ureteropelvic junction obstructions.[2,3] With improved instrumentation and incorporation of technologies such as a large endoscope working channel and active tip deflection, the evolution of surgical techniques have broadened while the complications noted with ureteropyeloscopy have actually decreased significantly.

 

The application of flexible fiber ureteroscope was first reported by Marshall in 1964. A 9F fiberscope manufactured by American Cystoscope Makers (Pelham Manor, NY) was passed into the ureter to visualize an impacted ureteral calculus. Subsequently, Bagley, Huffman, and Lyon began work at the University of Chicago to develop an improved flexible fiberoptic ureteropyeloscope in the 1980s.

 

The optical system consists of fiberoptic light bundles created from molten glass. Each glass fiber is cladded with a second layer of glass of different refractive index to improve the internal reflection, light transmission and also the durability of the endoscope. When the fibers are bundled randomly, they provide excellent light transmission for illumination, but no image. However, if the fibers are placed in a coherent fashion, the light from each fiber will coalesce to transmit images. Small lenses placed proximally and distally enable a telescopic effect with image magnification, increased field of view and focusing ability. A recent modification is the splitting of the light bundle distally to enable a more central placed working channel and better distribution of light within the working field of view.[5]

 

The deflection mechanism of the flexible ureteroscope permits maneuverability within the collecting system of the kidney. This deflection is usually provided by several wires running down the length of the endoscope and attached to a lever which is manually operated. Manipulating the lever will deflect the tip. If the tip moves in the same direction of the lever, the defection is described as “intuitive”- i.e. down is down and up is up. In the past, prior to 1992, deflection was active at the tip and secondary deflection along the shaft was passive. To obtain lower pole access, the urologist would maximally deflect and advance the tip of the endoscope.[6] The secondary deflection was achieved by the endoscope passively buckling at a set designed point along the shaft. In 1992, Karl Storz (KSEA, Tuttilegan, Germany) was able to downsize the flexible endoscope from 9.8 Fr to 7.5 Fr while maintaining the same 3.6 Fr working channel. This milestone event allowed all urologists to more easily pass the endoscope and in so doing broaden the therapeutic applications. The current instruments have continuous controlled dual deflection with increased downward and upward deflection up to 270 degrees, referred to as “exaggerated deflection” in both directions. This deflection is performed with a single more ergonomic lever as compared to the cumbersome two separate levers employed by the ACMI DUR 8 (Gyrus Inc, London, England). The radius of deflection is also broader, thereby enabling more maneuverability and permitting placement of instruments in the lower pole. The most modern endoscopes also incorporate a shock absorbing system (a form of secondary deflection) which is located proximal to the active deflecting system and allows for gentle rolling of the distal end for approximately ten centimeters enabling access more deeply into the calyces.[7]

 

The working channel permits placement under direct vision of a variety of accessories including graspers, baskets, wires and laser fibers through the endoscope. All current endoscopes have a channel of at least 3.6 Fr which allows the use of instruments up to 3 Fr while still permitting concurrent irrigation. The composition material of the accessory influences tip deflection. For example, graspers and baskets with a shaft composed of polyamide tend to be stiffer and inhibit deflection as compared to Teflon sheathed accessories.[8]

 

Many ureteroscope repairs are due to damage to the working channel from malfunction or incorrect use of the holmium laser. This is often a technical issue when the fiber firing end is located too close to the endoscope tip. The new-generation Storz endoscopes incorporate a bead-like sequence of hollow ceramic rings in the distal end of the working channel for 1.5 cm. This protects the instrument from thermal or electrocautery damage and allows the endourologist to work closer to the tumor, stricture or stone while using laser energy.

Additional Details

Sex man
Age 18 - 25